Home › Leak detection

LEAK DETECTION

Leak Detection in Mesquite, TX

Water bill jumped, a spot on the floor feels warm, or the meter spins with everything off? We pinpoint hidden leaks in Mesquite homes with non-invasive equipment — marked within inches, before anything is opened. Most detection visits cost $200–$500.

Marked location + written report with readings

Non-invasive first — nothing opened on a guess

Moisture documented for your insurance claim

Homes, rentals and businesses

Every Mesquite ZIP code

Last reviewed November 2026. Written by LeakRush.

AT A GLANCE

  • Most Mesquite leak detection visits cost $200–$500. Slab leaks and hard-to-find leaks that need tracer gas run $300–$800.
  • Detection is non-invasive first: pressure testing, acoustic listening, and thermal imaging locate the leak before a single wall or floor is opened.
  • Run the free meter test below before you call anyone — in about an hour it tells you whether a leak exists at all.
  • Finding the leak is step one. If water has already spread through floors or walls, extraction and drying need to start the same day — and that part is what we handle in-house.

$200–$500

Typical cost of a standard leak detection visit in Mesquite

1.5–2.5 hours

How long a standard residential detection visit takes

6–18 inches

How closely acoustic detection pinpoints a leak

24–48 hours

How fast mold can start on wet drywall and carpet pad

Water in your house right now?

Call (800) 870-4581. We will tell you what to do first.

If your water bill jumped for no reason, one spot on the floor feels warm, or your water meter spins while everything in the house is off, you probably have a hidden leak. Professional water leak detection in Mesquite typically costs $200 to $500, uses non-invasive equipment to pinpoint the leak — usually within inches — before anything is cut or dug, and takes about one and a half to two and a half hours. Below: the signs to watch for, a free test you can run yourself first, the five methods professionals use and what each one costs, and what happens once the leak is found. Residential leak detection services in Mesquite follow the same sequence on every visit: confirm, isolate, then pinpoint.

Signs of a hidden water leak

Hidden leaks rarely announce themselves with a puddle. In Mesquite’s slab-built homes, they show up as small changes most people explain away for a month or two:

  • Your water bill is up 30% or more compared with the same month last year, with no change in how your household uses water. This is the single most common reason people call.
  • A warm spot on the floor when you walk barefoot — the classic sign of a hot-water line leaking under the slab.
  • The water heater runs far more than it used to. A hot-side leak bleeds heated water around the clock, and the heater works overtime to keep up — a gas or electric bill creeping up alongside the water bill is the tell.
  • The meter dial moves with everything off. Water is flowing and no fixture is using it, it’s going somewhere it shouldn’t.
  • Low water pressure at several fixtures at once — pressure is escaping somewhere upstream of all of them.
  • Running or hissing water sounds inside a wall or under the floor when the house is quiet.
  • A musty smell in one room that doesn’t clear with cleaning — moisture feeding mold somewhere you can’t see.
  • Drywall stains, bubbling paint, or baseboards pulling away from the wall.
  • New cracks, or doors that suddenly stick — a long-running under-slab leak washes soil out from beneath the foundation, and the slab settles into the gap.
  • A soggy patch or one unusually green strip in the yard, which points to the underground supply line rather than the house.

One sign can have an innocent explanation. Two or more together almost never do. And time matters more than people expect: even a slow one-gallon-per-hour leak wastes over 700 gallons a month — the EPA estimates the average household’s leaks waste nearly 10,000 gallons a year — and every week it runs is another week of water soaking into flooring, drywall, and the soil under your slab. If a few of these sound familiar, start with the free test below — then know the signs of a slab leak specifically if the warm-floor or cracking signs are yours.

Check it yourself first: the meter test

The meter test is the fastest way to confirm a leak, and it costs nothing. If every tap and appliance is off and the meter is still moving, water is going somewhere.

  1. Step 1 — Compare the bill. City of Mesquite water bills show your last 12 months of usage. Compare this month with the same month last year. A difference of up to about 30% can be seasonal — guests, irrigation, a hotter month. Well above that, with no lifestyle change, points to a leak.
  2. Step 2 — Turn everything off. Every faucet, the ice maker, dishwasher, washing machine, irrigation system, and pool auto-fill. Nothing in the house should be using water.
  3. Step 3 — Watch the meter. Your meter is usually in a box at the curb. Find the leak indicator — a small triangular or star-shaped dial. If it is moving with everything off, water is flowing somewhere in your system right now. Note the meter reading, wait one to two hours without using any water (the EPA’s WaterSense guidance uses a two-hour no-use window), and check again. A changed reading confirms an active leak.
  4. Step 4 — Rule out the toilets. Put a few drops of food colouring in each toilet tank and wait 15 minutes without flushing. Colour in the bowl means a leaking flapper or flush valve — the most common hidden cause of a high bill, and usually a $10–$30 fix you can do yourself.
  5. Step 5 — Isolate the yard. Shut off the irrigation valve and repeat the meter check. If the dial stops, your leak is outside — irrigation or the underground supply line — not in the house.

If the meter still moves after all five steps, the leak is in the house lines or under the slab, and it’s past what DIY testing can locate. That’s exactly the point where professional detection earns its fee: the question is no longer whether you have a leak, it’s where — and guessing wrong means opening the wrong floor.

One exception worth knowing: the meter test only sees pressurised supply lines. A leaking drain line under the slab doesn’t move the meter at all — drains empty by gravity, not pressure. If your signs point drain-side (slow drains, sewer smells, a soggy patch along the sewer line’s path) but the meter sits still, you’re not cleared. The test for that is a hydrostatic test of the drain system, usually paired with a camera inspection — both covered in the methods below.

What if the meter doesn’t move, but I still suspect a leak?

A drain-side leak doesn’t move the meter, because the meter test only sees pressurised supply lines — drains empty by gravity, not pressure. The check for those leaks is a hydrostatic test of the drain system, usually paired with a camera inspection. So a still meter doesn’t clear you: if your signs point drain-side — slow drains, sewer smells, a soggy patch along the sewer line’s path — the drain test is the next step.

Not sure what you are dealing with?

Describe it or text a photo. We will tell you what we think is going on.

Don’t overpay the city: Mesquite’s leak adjustment

Here’s a Mesquite-specific saving most homeowners never hear about. Once a leak has been repaired, the City of Mesquite will adjust your water bill — 50% of your above-average usage, on one bill — if you submit the online leak adjustment form with proof of repair. A plumber’s receipt counts as proof; so does a supplies receipt if you fixed it yourself. Two limits to know: only one adjustment per account in any rolling 12-month period, and it can take a full billing cycle to show up. Questions go to the Utility Billing Office at 972-216-6208.

Notice what the city asks for: proof, in writing, that a real leak existed and was repaired. It’s the same lesson as the insurance side of this page — in every direction, the paperwork is what gets you paid. And it’s one more reason the written detection report matters: it establishes that the leak was real, hidden, and found on a specific date.

How professionals find a hidden leak

A proper water leak detection visit works in sequence — confirm the leak exists, isolate which part of the system it’s in, then pinpoint it — and nothing gets opened until the location is known. These are the five methods used across Mesquite and DFW, and what each typically costs here.

Pressure testing and isolation — $200–$400

The system is pressurised and sections are isolated using shutoff valves. The section that won’t hold pressure is the section with the leak. This confirms a leak exists and narrows it to the hot side, the cold side, or a drain line before any pinpointing starts. Best for: the first confirmation on almost every visit.

Acoustic leak detection — $250–$500

Pressurised water escaping through a crack or pinhole makes a distinct hiss. Ground microphones and listening equipment isolate that sound through concrete, soil, and walls, and triangulate it — typically pinpointing the leak within 6 to 18 inches. Best for: slab leaks and underground supply lines.

Thermal imaging — $300–$600

An infrared camera reads temperature differences across a floor or wall. A hot-water leak shows up as a warm bloom on the surface above it; cold-water leaks show as cooler patches where evaporation chills the material. It covers large areas fast and touches nothing. Best for: hot-side slab leaks, leaks behind walls and ceilings, and the first survey of a suspect area.

Tracer gas detection — $400–$800

A safe hydrogen-nitrogen gas mix is introduced into the emptied line. The gas escapes at the leak point and rises through soil or concrete, where a sensitive detector finds it at the surface. Best for: the stubborn ones — very small pinhole leaks and low-pressure lines that acoustic equipment can’t hear.

Video pipe inspection — $200–$500

Drain and sewer lines aren’t pressurised, so they don’t hiss and can’t be found by sound. A camera on a flexible cable is fed through a cleanout to inspect the line from inside — cracks, separated joints, and root intrusion are visible on screen. For under-slab drain leaks it’s usually paired with a hydrostatic test: the drain system is plugged and filled with water, and a falling level confirms the leak the camera then goes hunting for. Best for: drain and sewer leaks, especially in Mesquite’s 1960s–’70s cast-iron drain lines.

Most straightforward visits need one or two of these. Complex cases — a leak that survives the first methods, or several lines to test — combine methods and run $500–$1,200.

What you walk away with. A detection visit should end with two things in your hand, not just a number on an invoice: the leak location physically marked where it was found, and a written report — the readings, the photos, the pinpoint — that a plumber can repair from and an insurer can work from. If a company leaves you with a verbal ‘it’s probably over that way’ and a repair estimate, that wasn’t detection. That was a guess with a price tag.

Which method will find my leak?

It depends on the pipe material, the location of the leak and how much access the equipment has — that is what decides which of the five methods is used first. Most straightforward visits need one or two methods, and a leak is confirmed with a second method before anything is opened: nothing gets opened until the location is known.

Underground and slab leaks in Mesquite

Most Mesquite homes sit on a concrete slab foundation, with the water supply lines running underneath it — which is why ‘underground leak detection’ and ‘slab leak’ are nearly the same conversation here. An under-slab leak does two kinds of damage at once: the water itself, soaking up through the slab into flooring, and erosion, as the escaping water washes soil out from under the foundation. Left long enough, the slab settles into the washed-out void — that’s when the cracks and sticking doors appear.

Yard lines leak differently. The supply line from the street meter to the house runs under the lawn, and its leaks announce themselves outside: the soggy patch, the green strip, the meter that moves while the house uses nothing.

Neither kind requires exploratory digging. Acoustic equipment hears pressurised leaks through soil and concrete, and tracer gas finds the ones too quiet to hear — the location gets marked first, and only then does anyone discuss opening anything.

One caution that surprises people: the warm or wet spot on your floor is often not directly above the leak. Water escaping under a slab follows the easiest path through soil and gravel, and it can surface several feet from where the pipe actually failed. That’s why the pinpoint — not the puddle — decides where anything gets opened. When the leak is under the slab, the repair itself has three standard options — spot repair, rerouting the line, or repiping — each with different costs and disruption. Those are covered on our slab leak repair and detection page, which also explains the signs that separate a slab leak from every other kind.

Can an underground leak be found without digging?

Yes. Underground leak detection pinpoints the leak first: acoustic equipment hears pressurised leaks through soil and concrete, and tracer gas finds the ones too quiet to hear. Neither kind requires exploratory digging — the location gets marked first, and only then does anyone discuss opening anything.

What leak detection costs in Mesquite

ServiceTypical Mesquite cost
Standard leak detection visit$200–$500
Pressure testing & isolation$200–$400
Acoustic detection$250–$500
Video pipe inspection$200–$500
Thermal imaging$300–$600
Tracer gas detection (specialty)$400–$800
Multi-method detection (complex cases)$500–$1,200

Three things worth knowing about these numbers. First, leak detection services price detection and repair separately, everywhere — the detection fee buys the pinpoint: the exact location, confirmed by instruments. The repair is quoted once that location is known, because a wall repair and an under-slab reroute are different jobs. Second, many Mesquite companies credit the detection fee toward the repair when they do the repair work — ask whether yours will, and get it in writing when you book. Third, what moves your price inside these ranges is mostly access and scope: one line to test costs less than three, a drain-side camera job differs from a pressurised supply line, and a leak found by the second method costs less than one that needs gas tracing. And timing matters: after-hours and emergency detection costs more across the market, so if the water is shut off and nothing is actively spreading, a morning appointment buys the same pinpoint for less.

For the damage side of the bill — what extraction and drying cost once a leak has spread — see our Mesquite water extraction cost guide.

Why does one leak cost $200 to find and another $1,200?

Because the price depends on how many methods the leak needs, how easy the lines are to reach, and where the leak sits. One line to test costs less than three, a drain-side camera job differs from a pressurised supply line, and a leak found by the second method costs less than one that needs gas tracing. And a leak under slab or concrete — or on an underground line — takes more work to pinpoint than one in an accessible wall, which is why a standard visit runs $200–$500 while complex, multi-method cases run $500–$1,200.

Know the signs but not the spot?

Get it pinpointed — call or text (800) 870-4581.

The leak is found — what happens next

A detection visit ends with a marked location and a decision — the marked location and written report a leak detection company hands over. From there, the job splits into two tracks, and it helps to know which is which — we explain the full split on our who does what page: plumber, leak detection, and restoration.

The pipe. Repairing the pipe — a spot repair, a rerouted line, a replaced section — is plumbing work, and in Texas plumbing work belongs to a TSBPE-licensed plumber. We’ll be straight about that: we coordinate with licensed plumber partners, and they get the pinpoint and the detection documentation, so you never pay a second company to search for a leak that’s already been found.

The water. By the time most hidden leaks are located, they’ve been soaking flooring, drywall, or cabinetry for weeks. That water is our side of the job: extraction, structural drying with moisture mapping, and mold prevention — mold can begin growing within 24 to 48 hours in the right conditions, which is why drying starts the same day, not after the repair is finished and forgotten. Everything gets documented — moisture readings, photos, drying logs — because that documentation is what your insurance claim runs on. (What insurers typically cover, and what they don’t, is laid out in our Texas water damage insurance guide)

If water is actively spreading right now — not a suspicion, a flood — skip to our water emergency first steps and shut the water off at the meter before you read anything else.

How fast do I need to act once the leak is found?

Fast. Once water is standing, mold can begin growing within 24 to 48 hours — which is why drying starts the same day, not after the repair is finished. Extraction and drying can start the same day the leak is pinpointed, and everything gets documented as it happens. Waiting only leaves the water soaking into flooring, drywall and cabinetry longer, which is what turns a detection job into a restoration job.

Leak found and water spreading?

We start extraction and drying the same day — call or text (800) 870-4581.

Commercial leak detection in Mesquite

Unexplained usage spikes hit businesses the same way they hit homes, with two differences: the lines are bigger, and shutting down to hunt a leak costs trading hours. We handle detection for Mesquite restaurants, retail units, rental properties, and small multi-unit buildings, with after-hours visits where the work would otherwise interrupt business. Property managers and landlords get the same documentation package as a homeowner — pinpoint, readings, photos — formatted for owners and insurers. It records when the water was found, where, how far it had spread, and what was done first — the items owners and adjusters ask for before anything else, captured while they still exist to be captured. For rentals, that paper trail is often the difference between a repair bill and a dispute.

Can detection run without shutting the business down?

Yes. The methods are non-invasive — pressure testing, acoustic listening and thermal imaging locate the leak before anything is opened — and visits can be scheduled around business hours, with after-hours visits where the work would otherwise interrupt business. Property managers and landlords still get the same documentation package as a homeowner — pinpoint, readings, photos — formatted for owners and insurers.

Why Mesquite homes leak

None of this is random. Mesquite’s leak pattern is built into its housing stock:

  • Thin-wall copper at end of life. Homes built from the 1960s through the mid-1980s were commonly plumbed with Type M copper under the slab. That pipe is now 40 to 60 years old, and pinhole leaks are what ageing thin-wall copper does.
  • High water pressure. Mesquite service pressure often runs 80–120 PSI — well above the 80 PSI point where pressure starts working pinholes open faster. (A pressure-reducing valve is cheap insurance; ask whoever does your detection to check your static pressure while they’re there.)
  • Blackland clay. The Vertisol soil under Mesquite swells when it soaks and shrinks when it dries. The slab moves one way, the rigid lines under it move another, and the stress lands on the pipe.
  • Cast-iron drains. Drain lines from the 1960s and 70s are reaching end of life across the city, with root intrusion at the joints the usual failure.

That’s not a scare pitch — it’s why a city of this age and soil has the leak calls it has, and why catching one in month one, at detection prices, beats meeting it in month six at restoration prices.

One modern safeguard worth knowing about: whole-home water monitors — Moen Flo and Phyn are the two common ones — watch your main line around the clock and flag the continuous low flow of a developing leak, and the better models shut the water off automatically when the pattern turns dangerous. They don’t replace detection when you already suspect a leak, but on a 1970s slab home they’re the closest thing to an early-warning system.

Frequently asked questions

How much does leak detection cost in Mesquite, TX?

Most homeowners pay $200–$500 for a standard detection visit. Slab leaks located with thermal imaging typically run $300–$600, and tracer gas cases $400–$800. Detection is priced separately from the repair; many companies credit the fee toward the repair if they do the fix — ask in writing when you book.

Is leak detection worth it?

For a hidden leak, yes — it’s the cheapest decision in the whole chain. The alternative is opening floors and walls to look, and every wrong hole adds its own repair bill on top of the plumbing. Set the fee against what it prevents: water-damage insurance claims average about $15,400 (Insurance Information Institute figures), while a leak caught in its first month is usually a detection fee plus a modest repair — not a claim.

Can a leak be found without tearing up my floors or walls?

Yes — that’s the point of the equipment. Pressure testing confirms and isolates the leak, acoustic listening and thermal imaging pinpoint it through the surface, and nothing is opened until the location is marked. Access is only cut afterwards, at the pinpoint, for the repair itself.

How accurate is leak detection?

Very — when it’s done in sequence. Pressure testing first isolates the leak to one part of the system; then acoustic and thermal methods cross-check each other over the same ground, and in good conditions acoustic pinpointing lands within about 6 to 18 inches. The spot is only marked once the methods agree — which is why a marked location from a proper visit can be opened with confidence.

How can I tell if I have a leak before calling anyone?

Run the meter test: turn off every water-using fixture and appliance, then watch the small leak-indicator dial on your meter. If it moves, water is flowing somewhere. Rule out toilet flappers with food colouring in the tank, and isolate the irrigation. If the meter still moves, the leak is in the house lines or under the slab.

How long does a leak detection visit take?

A standard residential visit takes about one and a half to two and a half hours. Slab leaks and multi-line or drain-side cases can take up to four. You get the pinpoint and documentation the same visit in most cases.

Should I call a plumber or a leak detection service first?

If you can see the leak — a dripping joint, a burst fitting — call a plumber; there’s nothing to detect. If the leak is hidden, detection comes first: it hands the plumber an exact location, so the repair happens once, in the right place, instead of after exploratory opening. Our who does what page walks through which trade handles each stage.

Does homeowners insurance cover leak detection?

It varies by policy. Texas homeowners policies generally cover sudden and accidental water damage — the soaked drywall and flooring — but often not the pipe repair itself. Detection documentation (readings, photos, a written pinpoint) strengthens any claim. Some policies add optional service-line coverage for underground lines; check yours, or start with our insurance guide. One caution from the claims world: insurers sometimes deny hidden-leak damage as ‘long-term seepage’ — a maintenance issue rather than an accident. A dated detection report, showing when the leak was located and what the moisture readings were, is the evidence that pushes back on that argument.

What’s the difference between leak detection and slab leak detection?

Leak detection is the umbrella: any hidden leak — walls, ceilings, yard lines, drains. Slab leak detection is the specific case where the leak is in a line under the concrete foundation. The methods overlap, but slab work leans harder on thermal imaging, because hot-water leaks draw a visible warm map on the floor above them.

Still have a question?

Call or text. If you can handle it yourself, we will say so.

Keep reading

Water going somewhere it shouldn’t?

If the meter is moving, the bill has jumped, or the floor feels warm — don’t wait for the damage to introduce itself. Call or text (800) 870-4581, day or night, or request a callback and we’ll come to you.

LeakRush — Emergency Water Extraction · 3213 I-30, Suite 301, Mesquite, TX 75150 · (800) 870-4581